d  W   @ l  X8Y@\P ]t ^B@QBApBEtBJC915resolution0.5.25A program to change the resolution of an available vbios mode.It patches only the RAM version of the video bios so the new resolution is lost each time you reboot. If you want to set the resolution each time you reboot and before launching X, use your rc.local, local.start ... file of your Linux version. 915resolution supports the 845G, 855GM, 865G, 915G, 915GM, 945G, and 945GM chipsets.OScientific LinuxApplications/Systemlinuxi386915resolution-0.5.2-5.src.rpmconfig(915resolution)915resolution@@@ @@@@@JJ/bin/bash/bin/bash/bin/sh/bin/sh/bin/sh/sbin/chkconfigconfig(915resolution)libc.so.6libc.so.6(GLIBC_2.0)rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)0.5.2-53.0.4-14.0-10.5.2-50.5.2-5915resolution915resolution915resolution915resolution-0.5.2LICENSE.txtREADME.txtchanges.logchipset_info.txtdump_bios/etc/rc.d/init.d//etc/sysconfig//usr/sbin//usr/share/doc//usr/share/doc/915resolution-0.5.2/915resolution-0.5.2-5.i386.rpm3d52ea202c79b1f4828f27d564c3d0045RPMS.contribd# % KDHY ux~ 1XDYH\P]T^fB@qBABEBJCSL_enable_serialconsole-11523.15enable serial console for 38400 baudThis package will install (and automatically run) the 'serialconsole' script. This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows root to login at this prompt. This rpm should be installed in the %post section because it requires the grub.conf or lilo.conf file to be there. This will modify only the bootloader that is active at the time the rpm is installed, either LILO or grub.Scientific LinuxSteven Timm SLlinuxnoarchSL_enable_serialconsole-3.1-5.src.rpmSL_enable_serialconsole-1152@@JJ/bin/sh/usr/bin/perlrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-13.1-5serialconsole_all/usr/sbin/SL_enable_serialconsole-1152-3.1-5.noarch.rpm6cd21a3ca1fe50091ea2b41f793155a6RPMS.contribd" $ I@DU qtz -X@YD\L]P^bB@mBABEBJCSL_enable_serialconsole-1923.15enable serial console for 19200 baudThis package will install (and automatically run) the 'serialconsole' script. This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows root to login at this prompt. This rpm should be installed in the %post section because it requires the grub.conf or lilo.conf file to be there. This will modify only the bootloader that is active at the time the rpm is installed, either LILO or grub.Scientific LinuxSteven Timm SLlinuxnoarchSL_enable_serialconsole-3.1-5.src.rpmSL_enable_serialconsole-192@@JJ/bin/sh/usr/bin/perlrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-13.1-5serialconsole_all/usr/sbin/SL_enable_serialconsole-192-3.1-5.noarch.rpm814fb17fd6167c7c486ca237c4544235RPMS.contribd  YPTe  RXdYh\p]t^B@BABEBJCSL_enable_serialconsole3.15Script to enable serial console in all the right places.This package will install (and automatically run) the 'serialconsole' script. This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows root to login at this prompt. This rpm should be installed in the %post section because it requires the grub.conf or lilo.conf file to be there. This will modify only the bootloader that is active at the time the rpm is installed, either LILO or grub.Scientific LinuxSteven Timm SLlinuxnoarchSL_enable_serialconsole-3.1-5.src.rpmSL_enable_serialconsole@@JJ/bin/sh/usr/bin/perlinitscriptsperlrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-13.1-5serialconsole_all/usr/sbin/SL_enable_serialconsole-3.1-5.noarch.rpm7de2f1f5fb0ef9869d8299b6c03ff3a5RPMS.contribd" $ JDHY ux~ 1XDYH\P]T^fB@qBABEBJCSL_enable_serialconsole-3843.15enable serial console for 38400 baudThis package will install (and automatically run) the 'serialconsole' script. This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows root to login at this prompt. This rpm should be installed in the %post section because it requires the grub.conf or lilo.conf file to be there. This will modify only the bootloader that is active at the time the rpm is installed, either LILO or grub.Scientific LinuxSteven Timm SLlinuxnoarchSL_enable_serialconsole-3.1-5.src.rpmSL_enable_serialconsole-384@@JJ/bin/sh/usr/bin/perlrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-13.1-5serialconsole_all/usr/sbin/SL_enable_serialconsole-384-3.1-5.noarch.rpm78bbf32671ace147dbd122706ffaca06RPMS.contribd! # G@DU qtz -X@YD\L]P^bB@mBABEBJCSL_enable_serialconsole-963.15enable serial console for 9600 baudThis package will install (and automatically run) the 'serialconsole' script. This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows root to login at this prompt. This rpm should be installed in the %post section because it requires the grub.conf or lilo.conf file to be there. This will modify only the bootloader that is active at the time the rpm is installed, either LILO or grub.Scientific LinuxSteven Timm SLlinuxnoarchSL_enable_serialconsole-3.1-5.src.rpmSL_enable_serialconsole-96@@JJ/bin/sh/usr/bin/perlrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-13.1-5serialconsole_all/usr/sbin/SL_enable_serialconsole-96-3.1-5.noarch.rpm3604ea8ce2aefe89643976271b366bdcRPMS.contribd   T   T`---XY \$T]tT^ RB@KBApBEtBJCati-fglrx8.18.6.10.SL.1ATI proprietary driver for ATI Radeon graphic cardsThis Package contains the X11 driver, utilities and libraries needed for the ATI proprietary driver for ATI Radeon graphic cards.'FermiUser Interface/X Hardware Supportlinuxi686@ati-fglrx-8.18.6.1-0.SL.1.src.rpmatiogl_a_dri.sofglrx_dri.solibGL.so.1libfglrx_gamma.1libfglrx_pp.1ati-fglrx@ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@JJ/bin/sh/bin/sh/bin/sh/sbin/ldconfig/sbin/ldconfig/sbin/ldconfig/usr/bin/pythonlibGL.so.1libGLU.so.1libICE.so.6libSM.so.6libX11.so.6libXext.so.6libXft.so.2libXinerama.so.1libXmu.so.6libXrender.so.1libXxf86vm.so.1libc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libdl.so.2libdl.so.2(GLIBC_2.0)libdl.so.2(GLIBC_2.1)libfglrx_gamma.1libfglrx_pp.1libfreetype.so.6libgcc_s.so.1libgcc_s.so.1(GCC_3.0)libm.so.6libm.so.6(GLIBC_2.0)libpthread.so.0libpthread.so.0(GLIBC_2.0)libqt-mt.so.3librt.so.1librt.so.1(GLIBC_2.2)libstdc++.so.5libstdc++.so.5(CXXABI_1.2)libstdc++.so.5(GLIBCPP_3.2)libstdc++.so.6libstdc++.so.6(CXXABI_1.3)libstdc++.so.6(GLIBCXX_3.4)rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1fglrxnvidia-glxnvidia-glx-legacy0:8.18.6.1-0.SL.1   ati-fglrx.shati-fglrxati-fglrx-config-displayaticonfigfgl_glxgearsfglrx_pplayfglrx_xgammafglrxconfigfglrxinfofireglcontrolpanellibaticonfig.alibfglrx_gamma.alibfglrx_gamma.so.1libfglrx_gamma.so.1.0libfglrx_pp.alibfglrx_pp.so.1.0atiogl_a_dri.sofglrx_dri.sofglrx_drv.olibfglrxdrm.aati-fglrxlibGL.so.1libGL.so.1.2ati-fglrx-config-displaylivna-ati-fglrx-fireglcontrol.desktopati-fglrx-8.18.6.1ATI_LICENSE.TXTLICENSE.GPLLICENSE.QPLLICENSE.expatLICENSE.xmlconfigarticles1gbhang.html4461.html4462.html4463.html4464.html4469.html4470.html4475.html4478.html4479.html4480.html4481.html4482.html4483.html4484.html4485.htmlcorruptstereo.htmlcorruptvtswitch.htmldevshm.htmldga3dhang.htmldoom3corrupt.htmldualheadvideo.htmllaptopsuspend.htmlmissingdrmheaders.htmlmousecursorhang.htmlno3d-aiw8500dv.htmlno3d-kt400.htmlnomembercount.htmlpcie3dmemoryleak.htmlr420blankdisplay.htmlrv280dviblankdisplay.htmlrv350springdale.htmlsecondheadcorruption.htmlxf86_enodev.htmlxrestartpcie.htmlxvsatshift.htmlconfigure.htmldriverfaq.htmlindex.htmlissues.htmllinuxfaq.htmlrelease-notesimagesbackgrnd.gifcaution.gifclipbrd.gifnoboarder.gifindex.htmltips-linux.htmluser-manualindex.htmlati.xpm/etc/profile.d//etc/rc.d/init.d//etc/sysconfig//usr/X11R6/bin//usr/X11R6/lib//usr/X11R6/lib/modules/dri//usr/X11R6/lib/modules/drivers//usr/X11R6/lib/modules/linux//usr/lib//usr/lib/ati-fglrx//usr/sbin//usr/share/applications//usr/share/doc//usr/share/doc/ati-fglrx-8.18.6.1//usr/share/doc/ati-fglrx-8.18.6.1/articles//usr/share/doc/ati-fglrx-8.18.6.1/release-notes//usr/share/doc/ati-fglrx-8.18.6.1/release-notes/images//usr/share/doc/ati-fglrx-8.18.6.1/user-manual//usr/share/pixmaps/ati-fglrx-8.18.6.1-0.SL.1.i686.rpm`ͫ3ff5393bc1f0dfae3f565d66979df91cRPMS.contribZd$ ( h  0RdxXY\,]@^B@BA(BE,BJMCati-fglrx-devel8.18.6.10.SL.1ATI proprietary driver for ATI Radeon graphic cards, devel partThis package provides header files and examples required for development for the ATI proprietary driver for ATI Radeon graphic cards.FermiDevelopment/Librarieslinuxi686ati-fglrx-8.18.6.1-0.SL.1.src.rpmati-fglrx-develJJ/usr/X11R6/include/X11/extensions/usr/include/GLati-fglrxrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)0:8.18.6.1-0.SL.13.0.4-14.0-10:8.18.6.1-0.SL.1fglrx_gamma.hglATI.hglxATI.hati-fglrx-devel-8.18.6.1fglrx_sample_source.tgz/usr/X11R6/include/X11/extensions//usr/include/GL//usr/share/doc//usr/share/doc/ati-fglrx-devel-8.18.6.1/ati-fglrx-devel-8.18.6.1-0.SL.1.i686.rpmfafb05ea0b5aa1fede1ed779446b4011RPMS.contrib~d  O  $?DPXY\]^B@/BALBEPBJqCbttv0.9.151.SL4xDriver for the bttv compatible video capture cardsThis Package contains the documentation and example configurations for the bttv and related driversFermiDocumentationlinuxi686bttv-0.9.15-1.SL4x.src.rpmbttv@JJ/bin/bashrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-10:0.9.15-1.SL4xbttv-0.9.15CARDLIST.bttvCARDLIST.saa7134CARDLIST.tunerCVSEntriesRepositoryRootCardsMAKEDEVREADME.bttvREADME.cx88README.cx88~README.irREADME.saa7134Sound-FAQTunersinsmod-optionsnot-in-cx2388x-datasheet.txt/usr/share/doc//usr/share/doc/bttv-0.9.15//usr/share/doc/bttv-0.9.15/CVS/bttv-0.9.15-1.SL4x.i686.rpmp*278a5c1847ac85b9c4c4b5bc3321cb07RPMS.contribd  <PTk  XY\]^&B@TBApBEtBJCdmapi2.2.01.SLData Management API runtime environment.Files required by system software using the Data Management API (DMAPI). This is used to implement the interface defined in the X/Open document: Systems Management: Data Storage Managment (XDSM) API dated February 1997. This interface is implemented by the libdm library.Silicon Graphics, Inc.Silicon Graphics, Inc. System Environment/Baselinuxi386dmapi-2.2.0-1.SL.src.rpmlibdm.so.0dmapi@@@JJ/sbin/ldconfig/sbin/ldconfig/sbin/ldconfigrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1xfsdump2.0.02.2.0-1.SLliblibdm.so.0libdm.so.0.0.4dmapiCHANGES.gzCOPYINGPORTINGREADME//lib//usr/share/doc//usr/share/doc/dmapi/dmapi-2.2.0-1.SL.i386.rpms39053c350e263dcb6830f369c4793252RPMS.contribd  KDH_   UXlYp\| ] ^B@aBABEBJCdmapi-devel2.2.01.SLData Management API static libraries and headers.dmapi-devel contains the libraries and header files needed to develop programs which make use of the Data Management API (DMAPI). If you install dmapi-devel, you'll also want to install the dmapi (runtime) package and the xfsprogs-devel package.Silicon Graphics, Inc.Silicon Graphics, Inc. Development/Librarieslinuxi386dmapi-2.2.0-1.SL.src.rpmdmapi-devel JJdmapirpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)2.0.43.0.4-14.0-12.2.0-1.SLliblibdm.alibdm.lalibdm.soxfsdmapi.hliblibdm.alibdm.lalibdm.soman3dmapi.3.gz//lib//usr/include//usr/include/xfs//usr//usr/lib//usr/share/man//usr/share/man/man3/dmapi-devel-2.2.0-1.SL.i386.rpm>545e7fc39cc1106004401b92cba526eaRPMS.contribd%,4 8 k /5 < p[XxY\ ] ^sB@BABEBJCkernel-module-bttv-2.6.9-67.0.4.EL0.9.151.SL4xDriver for the bttv compatible video capture cardsThis Package contains the kernel modules required for bttv compatible video capture cards. This package is built for kernel 2.6.9-67.0.4.EL (i686).Scientific LinuxSystem Environment/Kernellinuxi686bttv-0.9.15-1.SL4x.src.rpmkernel-module-bttvkernel-module-bttv-2.6.9-67.0.4.EL@@@@JJJ/bin/sh/bin/shmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)3.0.4-14.0-13.0.3-10:0.9.15-1.SL4x0:0.9.15-1.SL4xbtcx-risc.kobttv.koir-common.koir-kbd-gpio.koir-kbd-i2c.komsp3400.kotda9887.kotuner.kotvaudio.kotvmixer.kov4l1-compat.kov4l2-common.kovideo-buf.ko/lib/modules/2.6.9-67.0.4.EL/v4l2/kernel-module-bttv-2.6.9-67.0.4.EL-0.9.15-1.SL4x.i686.rpmc3ffbc807ad27418182f4aeaad76d3adRPMS.contrib&d,3< @ s %?E L oXY\ ] ^B@BABEBJCkernel-module-bttv-2.6.9-67.0.4.ELhugemem0.9.151.SL4xDriver for the bttv compatible video capture cardsThis Package contains the kernel modules required for bttv compatible video capture cards. This package is built for kernel 2.6.9-67.0.4.ELhugemem (i686).mScientific LinuxSystem Environment/Kernellinuxi686bttv-0.9.15-1.SL4x.src.rpmkernel-module-bttvkernel-module-bttv-2.6.9-67.0.4.ELhugemem@@@@JJJ/bin/sh/bin/shmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)3.0.4-14.0-13.0.3-10:0.9.15-1.SL4x0:0.9.15-1.SL4xbtcx-risc.kobttv.koir-common.koir-kbd-gpio.koir-kbd-i2c.komsp3400.kotda9887.kotuner.kotvaudio.kotvmixer.kov4l1-compat.kov4l2-common.kovideo-buf.ko/lib/modules/2.6.9-67.0.4.ELhugemem/v4l2/kernel-module-bttv-2.6.9-67.0.4.ELhugemem-0.9.15-1.SL4x.i686.rpmid198fd938f1d9a7f4f4865c944e50129RPMS.contribd(/8 < o  7= D xcXY\ ] ^{B@BABEBJCkernel-module-bttv-2.6.9-67.0.4.ELsmp0.9.151.SL4xDriver for the bttv compatible video capture cardsThis Package contains the kernel modules required for bttv compatible video capture cards. This package is built for kernel 2.6.9-67.0.4.ELsmp (i686).qScientific LinuxSystem Environment/Kernellinuxi686bttv-0.9.15-1.SL4x.src.rpmkernel-module-bttvkernel-module-bttv-2.6.9-67.0.4.ELsmp@@@@JJJ/bin/sh/bin/shmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)3.0.4-14.0-13.0.3-10:0.9.15-1.SL4x0:0.9.15-1.SL4xbtcx-risc.kobttv.koir-common.koir-kbd-gpio.koir-kbd-i2c.komsp3400.kotda9887.kotuner.kotvaudio.kotvmixer.kov4l1-compat.kov4l2-common.kovideo-buf.ko/lib/modules/2.6.9-67.0.4.ELsmp/v4l2/kernel-module-bttv-2.6.9-67.0.4.ELsmp-0.9.15-1.SL4x.i686.rpm_2f409703e90c9a3bd961940224f74d54RPMS.contribd)08 < o  7= D xgXY\ ] ^B@BABEBJ Ckernel-module-bttv-2.6.9-67.0.4.ELxenU0.9.151.SL4xDriver for the bttv compatible video capture cardsThis Package contains the kernel modules required for bttv compatible video capture cards. This package is built for kernel 2.6.9-67.0.4.ELxenU (i686).^dScientific LinuxSystem Environment/Kernellinuxi686bttv-0.9.15-1.SL4x.src.rpmkernel-module-bttvkernel-module-bttv-2.6.9-67.0.4.ELxenU@@@@JJJ/bin/sh/bin/shmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)3.0.4-14.0-13.0.3-10:0.9.15-1.SL4x0:0.9.15-1.SL4xbtcx-risc.kobttv.koir-common.koir-kbd-gpio.koir-kbd-i2c.komsp3400.kotda9887.kotuner.kotvaudio.kotvmixer.kov4l1-compat.kov4l2-common.kovideo-buf.ko/lib/modules/2.6.9-67.0.4.ELxenU/v4l2/kernel-module-bttv-2.6.9-67.0.4.ELxenU-0.9.15-1.SL4x.i686.rpm:c20ca28d6d7e72c2f8a1f4e71ea10e46RPMS.contribd&/8 < }<@ Qkq x|}XY\]^B@BAPBETBJuCkernel-module-fglrx-2.6.9-67.0.4.EL8.18.6.10.SL.3ATI proprietary driver for ATI Radeon graphic cards, kernel partThis Package contains the kernel modules required for 3D acceleration with the ATI proprietary driver for ATI Radeon graphic cards. This package is built for kernel 2.6.9-67.0.4.EL (i686).gScientific LinuxSystem Environment/Kernellinuxi686ati-fglrx-8.18.6.1-0.SL.3.src.rpmkernel-module-fglrxkernel-module-fglrx-2.6.9-67.0.4.EL@@ @@JJJ/bin/sh/bin/shati-fglrxmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:8.18.6.13.0.4-14.0-13.0.3-10:8.18.6.1-0.SL.30:8.18.6.1-0.SL.3fglrx.ko/lib/modules/2.6.9-67.0.4.EL/kernel/drivers/char/drm/kernel-module-fglrx-2.6.9-67.0.4.EL-8.18.6.1-0.SL.3.i686.rpmwcb5956c5520098d7743181d978525cd3RPMS.contribd-6@ D LP a{ XY\]^B@2BAxBE|BJCkernel-module-fglrx-2.6.9-67.0.4.ELhugemem8.18.6.10.SL.3ATI proprietary driver for ATI Radeon graphic cards, kernel partThis Package contains the kernel modules required for 3D acceleration with the ATI proprietary driver for ATI Radeon graphic cards. This package is built for kernel 2.6.9-67.0.4.ELhugemem (i686).&Scientific LinuxSystem Environment/Kernellinuxi686ati-fglrx-8.18.6.1-0.SL.3.src.rpmkernel-module-fglrxkernel-module-fglrx-2.6.9-67.0.4.ELhugemem@@ @@JJJ/bin/sh/bin/shati-fglrxmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:8.18.6.13.0.4-14.0-13.0.3-10:8.18.6.1-0.SL.30:8.18.6.1-0.SL.3fglrx.ko/lib/modules/2.6.9-67.0.4.ELhugemem/kernel/drivers/char/drm/kernel-module-fglrx-2.6.9-67.0.4.ELhugemem-8.18.6.1-0.SL.3.i686.rpmD30ae5e7c831770f70c0124175e09b243RPMS.contribd)2< @ DH Ysy XY\]^B@"BAdBEhBJCkernel-module-fglrx-2.6.9-67.0.4.ELsmp8.18.6.10.SL.3ATI proprietary driver for ATI Radeon graphic cards, kernel partThis Package contains the kernel modules required for 3D acceleration with the ATI proprietary driver for ATI Radeon graphic cards. This package is built for kernel 2.6.9-67.0.4.ELsmp (i686).Scientific LinuxSystem Environment/Kernellinuxi686ati-fglrx-8.18.6.1-0.SL.3.src.rpmkernel-module-fglrxkernel-module-fglrx-2.6.9-67.0.4.ELsmp@@ @@JJJ/bin/sh/bin/shati-fglrxmodutilsmodutilsrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:8.18.6.13.0.4-14.0-13.0.3-10:8.18.6.1-0.SL.30:8.18.6.1-0.SL.3fglrx.ko/lib/modules/2.6.9-67.0.4.ELsmp/kernel/drivers/char/drm/kernel-module-fglrx-2.6.9-67.0.4.ELsmp-8.18.6.1-0.SL.3.i686.rpm8d911f54097f3a5d0a839187c54bdb06RPMS.contribd'08 < R  '- 4<_  s XY\]^B@BABEBJCkernel-module-nvidia-2.6.9-67.0.4.EL1.0.76760.SL.2Nvidia Display DriverThis is Nvidia's graphics driver for linux-x86 computers. Currently only x86 arch's are supported. This package is build for kernel 2.6.9-67.0.4.EL built for i686FIScientific LinuxSystem Environment/Kernellinuxi686nvidia-glx-1.0.7676-0.SL.2.src.rpmkernel-module-nvidiakernel-module-nvidia-2.6.9-67.0.4.EL@@@@@JJJ/bin/sh/bin/sh/usr/sbin/nvidia-config-displaymodutilsmodutilsmodutilsnvidia-glxrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:1.0.76763.0.4-14.0-13.0.3-1kernel-module-nvidia-legacy-2.6.9-67.0.4.EL0:1.0.7676-0.SL.20:1.0.7676-0.SL.2nvidianvidia.ko/lib/modules/2.6.9-67.0.4.EL/kernel/drivers/video//lib/modules/2.6.9-67.0.4.EL/kernel/drivers/video/nvidia/kernel-module-nvidia-2.6.9-67.0.4.EL-1.0.7676-0.SL.2.i686.rpm26ffc9e424fd0fbeb333f7960f1da64bRPMS.contribd.7@ D Z 39 @Hk   XY\]^)B@BABEBJCkernel-module-nvidia-2.6.9-67.0.4.ELhugemem1.0.76760.SL.2Nvidia Display DriverThis is Nvidia's graphics driver for linux-x86 computers. Currently only x86 arch's are supported. This package is build for kernel 2.6.9-67.0.4.ELhugemem built for i686G#Scientific LinuxSystem Environment/Kernellinuxi686nvidia-glx-1.0.7676-0.SL.2.src.rpmkernel-module-nvidiakernel-module-nvidia-2.6.9-67.0.4.ELhugemem@@@@@JJJ/bin/sh/bin/sh/usr/sbin/nvidia-config-displaymodutilsmodutilsmodutilsnvidia-glxrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:1.0.76763.0.4-14.0-13.0.3-1kernel-module-nvidia-legacy-2.6.9-67.0.4.ELhugemem0:1.0.7676-0.SL.20:1.0.7676-0.SL.2nvidianvidia.ko/lib/modules/2.6.9-67.0.4.ELhugemem/kernel/drivers/video//lib/modules/2.6.9-67.0.4.ELhugemem/kernel/drivers/video/nvidia/kernel-module-nvidia-2.6.9-67.0.4.ELhugemem-1.0.7676-0.SL.2.i686.rpm k713b59e4457c69feb549868963a4cfd0RPMS.contribd*3< @ V +1 8@c  w XY\]^B@BABEBJCkernel-module-nvidia-2.6.9-67.0.4.ELsmp1.0.76760.SL.2Nvidia Display DriverThis is Nvidia's graphics driver for linux-x86 computers. Currently only x86 arch's are supported. This package is build for kernel 2.6.9-67.0.4.ELsmp built for i686G!Scientific LinuxSystem Environment/Kernellinuxi686nvidia-glx-1.0.7676-0.SL.2.src.rpmkernel-module-nvidiakernel-module-nvidia-2.6.9-67.0.4.ELsmp@@@@@JJJ/bin/sh/bin/sh/usr/sbin/nvidia-config-displaymodutilsmodutilsmodutilsnvidia-glxrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:1.0.76763.0.4-14.0-13.0.3-1kernel-module-nvidia-legacy-2.6.9-67.0.4.ELsmp0:1.0.7676-0.SL.20:1.0.7676-0.SL.2nvidianvidia.ko/lib/modules/2.6.9-67.0.4.ELsmp/kernel/drivers/video//lib/modules/2.6.9-67.0.4.ELsmp/kernel/drivers/video/nvidia/kernel-module-nvidia-2.6.9-67.0.4.ELsmp-1.0.7676-0.SL.2.i686.rpm21f065d5ac53e8d5933fe364b9a72804RPMS.contribd+4< @ V /5 <Dg   XY\ ]^%B@BABEBJCkernel-module-nvidia-2.6.9-67.0.4.ELxenU1.0.76760.SL.2Nvidia Display DriverThis is Nvidia's graphics driver for linux-x86 computers. Currently only x86 arch's are supported. This package is build for kernel 2.6.9-67.0.4.ELxenU built for i686FScientific LinuxSystem Environment/Kernellinuxi686nvidia-glx-1.0.7676-0.SL.2.src.rpmkernel-module-nvidiakernel-module-nvidia-2.6.9-67.0.4.ELxenU@@@@@JJJ/bin/sh/bin/sh/usr/sbin/nvidia-config-displaymodutilsmodutilsmodutilsnvidia-glxrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0:1.0.76763.0.4-14.0-13.0.3-1kernel-module-nvidia-legacy-2.6.9-67.0.4.ELxenU0:1.0.7676-0.SL.20:1.0.7676-0.SL.2nvidianvidia.ko/lib/modules/2.6.9-67.0.4.ELxenU/kernel/drivers/video//lib/modules/2.6.9-67.0.4.ELxenU/kernel/drivers/video/nvidia/kernel-module-nvidia-2.6.9-67.0.4.ELxenU-1.0.7676-0.SL.2.i686.rpmy5ce8de0c261eff87442998b85c787bd9RPMS.contribd&, 3 N -3 8@yIBZXpYZ[\]^B@,BAhBElBJCkernel-module-qcusb-2.6.9-67.0.4.EL0.6.32.SL4xLinux QuickCam USB DriversLinux QuickCam USB drivers. These drivers are built for kernel 2.6.9-67.0.4.EL and architecture i686. They might work with newer/older kernels. 5Scientific LinuxTroy Dawson System Environment/Kernellinuxi686kernel-module-qcusb-2.6.9-67.0.4.EL-0.6.3-2.SL4x.src.rpmkernel-module-qc-usbkernel-module-qcusbkernel-qc-usbqc-usbqcusbkernel-module-qcusb-2.6.9-67.0.4.EL@@JJ/bin/sh/bin/shqcsetrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1qc-usbkernel-qc-usb0.6.3-2.SL4xqc-usbquickcam.ko/lib/modules/2.6.9-67.0.4.EL/kernel/drivers/usb//lib/modules/2.6.9-67.0.4.EL/kernel/drivers/usb/qc-usb/kernel-module-qcusb-2.6.9-67.0.4.EL-0.6.3-2.SL4x.i686.rpmN(e28a9111e5ec5c41421bb8f7813b6161RPMS.contribd-3 : U #=C HPeBvXYZ[\]^B@VBABEBJCkernel-module-qcusb-2.6.9-67.0.4.ELhugemem0.6.32.SL4xLinux QuickCam USB DriversLinux QuickCam USB drivers. These drivers are built for kernel 2.6.9-67.0.4.ELhugemem and architecture i686. They might work with newer/older kernels. S(Scientific LinuxTroy Dawson System Environment/Kernellinuxi686kernel-module-qcusb-2.6.9-67.0.4.ELhugemem-0.6.3-2.SL4x.src.rpmkernel-module-qc-usbkernel-module-qcusbkernel-qc-usbqc-usbqcusbkernel-module-qcusb-2.6.9-67.0.4.ELhugemem@@JJ/bin/sh/bin/shqcsetrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1qc-usbkernel-qc-usb0.6.3-2.SL4xqc-usbquickcam.ko/lib/modules/2.6.9-67.0.4.ELhugemem/kernel/drivers/usb//lib/modules/2.6.9-67.0.4.ELhugemem/kernel/drivers/usb/qc-usb/kernel-module-qcusb-2.6.9-67.0.4.ELhugemem-0.6.3-2.SL4x.i686.rpm`4772e3b16bec033907afff09564910aeRPMS.contribd)/ 6 Q 5; @HUBfX|YZ[\]^B@>BA|BEBJCkernel-module-qcusb-2.6.9-67.0.4.ELsmp0.6.32.SL4xLinux QuickCam USB DriversLinux QuickCam USB drivers. These drivers are built for kernel 2.6.9-67.0.4.ELsmp and architecture i686. They might work with newer/older kernels. Scientific LinuxTroy Dawson System Environment/Kernellinuxi686kernel-module-qcusb-2.6.9-67.0.4.ELsmp-0.6.3-2.SL4x.src.rpmkernel-module-qc-usbkernel-module-qcusbkernel-qc-usbqc-usbqcusbkernel-module-qcusb-2.6.9-67.0.4.ELsmp@@JJ/bin/sh/bin/shqcsetrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1qc-usbkernel-qc-usb0.6.3-2.SL4xqc-usbquickcam.ko/lib/modules/2.6.9-67.0.4.ELsmp/kernel/drivers/usb//lib/modules/2.6.9-67.0.4.ELsmp/kernel/drivers/usb/qc-usb/kernel-module-qcusb-2.6.9-67.0.4.ELsmp-0.6.3-2.SL4x.i686.rpmsfce376bcfc85516eda6291b70c4e8028RPMS.contribd*0 7 R 5; @HYBjXYZ[\]^B@DBABEBJCkernel-module-qcusb-2.6.9-67.0.4.ELxenU0.6.32.SL4xLinux QuickCam USB DriversLinux QuickCam USB drivers. These drivers are built for kernel 2.6.9-67.0.4.ELxenU and architecture i686. They might work with newer/older kernels. ɔScientific LinuxTroy Dawson System Environment/Kernellinuxi686kernel-module-qcusb-2.6.9-67.0.4.ELxenU-0.6.3-2.SL4x.src.rpmkernel-module-qc-usbkernel-module-qcusbkernel-qc-usbqc-usbqcusbkernel-module-qcusb-2.6.9-67.0.4.ELxenU@@JJ/bin/sh/bin/shqcsetrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1qc-usbkernel-qc-usb0.6.3-2.SL4xqc-usbquickcam.ko/lib/modules/2.6.9-67.0.4.ELxenU/kernel/drivers/usb//lib/modules/2.6.9-67.0.4.ELxenU/kernel/drivers/usb/qc-usb/kernel-module-qcusb-2.6.9-67.0.4.ELxenU-0.6.3-2.SL4x.i686.rpmZv63f7bfc78799ef85ae5068f519a38ea1RPMS.contribd$( * H  "<B HTmXY\]^B@BAPBETBJuCkernel-module-xfs-2.6.9-67.0.4.EL0.11XFS filesystem kernel modulesThe XFS(tm) Filesystem from Silicon Graphics, Inc. XFS is a highly scalable, high-performance journaling filesystem that provides rapid recovery from system crashes.%!Silicon Graphics, Inc.Silicon Graphics, Inc.System Environment/Kernellinuxi686kernel-module-xfs-2.6.9-67.0.4.EL-0.1-1.src.rpmkernel-modulekernel-module-xfskernel-module-xfs-2.6.9-67.0.4.EL@ @@JJJ/bin/sh/bin/sh/bin/sh/sbin/depmodkernelrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)2.6.9-67.0.4.EL3.0.4-14.0-13.0.3-10.1-10.1-1extraxfs.koxfs_quota.ko/lib/modules/2.6.9-67.0.4.EL//lib/modules/2.6.9-67.0.4.EL/extra/kernel-module-xfs-2.6.9-67.0.4.EL-0.1-1.i686.rpm3›2677c71ba74568845d6842dcc9a0176fRPMS.contribd+/ 1 O *DJ P\XY\]^B@FBABEBJCkernel-module-xfs-2.6.9-67.0.4.ELhugemem0.11XFS filesystem kernel modulesThe XFS(tm) Filesystem from Silicon Graphics, Inc. XFS is a highly scalable, high-performance journaling filesystem that provides rapid recovery from system crashes.Silicon Graphics, Inc.Silicon Graphics, Inc.System Environment/Kernellinuxi686kernel-module-xfs-2.6.9-67.0.4.ELhugemem-0.1-1.src.rpmkernel-modulekernel-module-xfskernel-module-xfs-2.6.9-67.0.4.ELhugemem@ @@JJJ/bin/sh/bin/sh/bin/sh/sbin/depmodkernel-hugememrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)2.6.9-67.0.4.EL3.0.4-14.0-13.0.3-10.1-10.1-1extraxfs.koxfs_quota.ko/lib/modules/2.6.9-67.0.4.ELhugemem//lib/modules/2.6.9-67.0.4.ELhugemem/extra/kernel-module-xfs-2.6.9-67.0.4.ELhugemem-0.1-1.i686.rpm4cff045a15b61dfc74bb0ab5bfb3a0931RPMS.contribd'+ - K &@F LXyXY\]^B@.BAdBEhBJCkernel-module-xfs-2.6.9-67.0.4.ELsmp0.11XFS filesystem kernel modulesThe XFS(tm) Filesystem from Silicon Graphics, Inc. XFS is a highly scalable, high-performance journaling filesystem that provides rapid recovery from system crashes.Silicon Graphics, Inc.Silicon Graphics, Inc.System Environment/Kernellinuxi686kernel-module-xfs-2.6.9-67.0.4.ELsmp-0.1-1.src.rpmkernel-modulekernel-module-xfskernel-module-xfs-2.6.9-67.0.4.ELsmp@ @@JJJ/bin/sh/bin/sh/bin/sh/sbin/depmodkernel-smprpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)2.6.9-67.0.4.EL3.0.4-14.0-13.0.3-10.1-10.1-1extraxfs.koxfs_quota.ko/lib/modules/2.6.9-67.0.4.ELsmp//lib/modules/2.6.9-67.0.4.ELsmp/extra/kernel-module-xfs-2.6.9-67.0.4.ELsmp-0.1-1.i686.rpm479a6d49b95e91a245ca2de5f62356419RPMS.contribd(, . L &@F LXyXY\]^B@4BAlBEpBJCkernel-module-xfs-2.6.9-67.0.4.ELxenU0.11XFS filesystem kernel modulesThe XFS(tm) Filesystem from Silicon Graphics, Inc. XFS is a highly scalable, high-performance journaling filesystem that provides rapid recovery from system crashes.Silicon Graphics, Inc.Silicon Graphics, Inc.System Environment/Kernellinuxi686kernel-module-xfs-2.6.9-67.0.4.ELxenU-0.1-1.src.rpmkernel-modulekernel-module-xfskernel-module-xfs-2.6.9-67.0.4.ELxenU@ @@JJJ/bin/sh/bin/sh/bin/sh/sbin/depmodkernelrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)2.6.9-67.0.4.ELxenU3.0.4-14.0-13.0.3-10.1-10.1-1extraxfs.koxfs_quota.ko/lib/modules/2.6.9-67.0.4.ELxenU//lib/modules/2.6.9-67.0.4.ELxenU/extra/kernel-module-xfs-2.6.9-67.0.4.ELxenU-0.1-1.i686.rpm5;18bb481ffe5d5063004516f12719ca29RPMS.contrib d   $ O  -@$$%$ptXY\-]-^B@ BA BE BJ Cnvidia-glx1.0.76760.SL.1Nvidia Display Driver and OpenGL librariesThis package provides Nvidia hardware accelerated OpenGL support for Nvidia chipsets from Gefore2, Quadro4 or newer.0gFermiSystem Environment/Librarieslinuxi686@@@@@nvidia-glx-1.0.7676-0.SL.1.src.rpmconfig(nvidia-glx)libGL.so.1libGLcore.so.1libXvMCNVIDIA_dynamic.so.1libglx.solibnvidia-tls.so.1nvidia-glx@@ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@JJ/bin/sh/bin/sh/bin/sh/bin/sh/sbin/ldconfig/usr/bin/pythonchkconfigchkconfigconfig(nvidia-glx)kernel-module-nvidialdconfiglibGLcore.so.1libX11.so.6libXext.so.6libatk-1.0.so.0libc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libdl.so.2libdl.so.2(GLIBC_2.0)libdl.so.2(GLIBC_2.1)libgdk-x11-2.0.so.0libgdk_pixbuf-2.0.so.0libglib-2.0.so.0libgmodule-2.0.so.0libgobject-2.0.so.0libgtk-x11-2.0.so.0libm.so.6libm.so.6(GLIBC_2.0)libnvidia-tls.so.1libpango-1.0.so.0libpangox-1.0.so.0pyxf86configrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)0:1.0.7676-0.SL.10:1.0.76763.0.4-14.0-1nvidia-glx-legacy0:1.0.7676-0.SL.10:1.0.7676-0.SL.1 nvidia0nvidia1nvidia2nvidia3nvidiactlnvidia-glx.confnvidia-glx.cshnvidia-glx.shnvidia-glxnvidia0nvidia1nvidia2nvidia3nvidiactllibXvMCNVIDIA.so.1.0.7676libXvMCNVIDIA_dynamic.so.1nvidia_drv.onvidialibglx.solibglx.so.1.0.7676nvidia-settingsGLgl.hglext.hglx.hglxext.hnvidialibGL.so.1libGL.so.1.0.7676libGLcore.so.1libGLcore.so.1.0.7676libnvidia-tls.so.1libnvidia-tls.so.1.0.7676tlslibnvidia-tls.so.1libnvidia-tls.so.1.0.7676nvidia-config-displaylivna-nvidia-settings.desktopnvidia-glx-1.0.7676LICENSENVIDIA_ChangelogREADME.FedoraREADME.txtXF86Config.samplenvidia-settings-user-guide.txt/dev//etc/ld.so.conf.d//etc/profile.d//etc/rc.d/init.d//etc/udev/devices//usr/X11R6/lib//usr/X11R6/lib/modules/drivers//usr/X11R6/lib/modules/extensions//usr/X11R6/lib/modules/extensions/nvidia//usr/bin//usr/include/nvidia//usr/include/nvidia/GL//usr/lib//usr/lib/nvidia//usr/lib/nvidia/tls//usr/sbin//usr/share/applications//usr/share/doc//usr/share/doc/nvidia-glx-1.0.7676/nvidia-glx-1.0.7676-0.SL.1.i686.rpm:?6dd15e718a28d37a01ebf26f4bdfeacbdRPMS.contribd$ ( >    /@LXY\ ] ^<B@BABEBJCnvidia-glx-devel1.0.76760.SL.1Nvidia OpenGL HeadersThis package provides Nvidia OpenGL header files required for development. The headers are installed in /usr/include/nvidia. ?FermiDevelopment/Librarieslinuxi686nvidia-glx-1.0.7676-0.SL.1.src.rpmnvidia-glx-develJJnvidia-glxrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)0:1.0.7676-0.SL.13.0.4-14.0-10:1.0.7676-0.SL.1libXvMCNVIDIA.anvidiaGLgl.hglext.hglx.hglxext.hlibGL.solibGLcore.so/usr/X11R6/lib//usr/include//usr/include/nvidia//usr/include/nvidia/GL//usr/lib/nvidia/nvidia-glx-devel-1.0.7676-0.SL.1.i686.rpm6286c407aa03a1dedf78cf15b5199e6dRPMS.contribvd   W .4 <(B#X(Y0ZP[T\X]^ B@#BADBEHBJiCopenssh3.9p18.SL.4.22The OpenSSH implementation of SSH protocol versions 1 and 2.SSH (Secure SHell) is a program for logging into and executing commands on a remote machine. SSH is intended to replace rlogin and rsh, and to provide secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. OpenSSH is OpenBSD's version of the last free version of SSH, bringing it up to date in terms of security and features, as well as removing all patented algorithms to separate libraries. This package includes the core files necessary for both the OpenSSH client and server. To make this package useful, you should also install openssh-clients, openssh-server, or both. Applications/Internetlinuxi386openssh-3.9p1-8.SL.4.22.src.rpmconfig(openssh)opensshL@@@@@@@@@@@@@@@@@@JJJ/sbin/nologinconfig(openssh)initscriptslibc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libc.so.6(GLIBC_2.2)libc.so.6(GLIBC_2.3)libcom_err.so.2libcrypt.so.1libcrypto.so.4libgssapi_krb5.so.2libk5crypto.so.3libkrb5.so.3libnsl.so.1libresolv.so.2libresolv.so.2(GLIBC_2.0)libresolv.so.2(GLIBC_2.2)libutil.so.1libz.so.1rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)3.9p1-8.SL.4.225.203.0.4-14.0-13.0.3-1ssh3.9p1-8.SL.4.223.9p1-8.SL.4.22sshmodulissh-keygenopensshssh-keysignopenssh-3.9p1CREDITSChangeLogINSTALLLICENCEOVERVIEWREADMEREADME.dnsREADME.platformREADME.privsepREADME.smartcardRFC.nroffTODOWARNING.RNGssh-keygen.1.gzssh-keysign.8.gz/etc//etc/ssh//usr/bin//usr/libexec//usr/libexec/openssh//usr/share/doc//usr/share/doc/openssh-3.9p1//usr/share/man/man1//usr/share/man/man8/openssh-3.9p1-8.SL.4.22.i386.rpm1289746dac2c760e65ea72aa32f4fe59RPMS.contribbd " I   ( Tt   BXYZ[\ ] ^B@BA0BE4BJUCopenssh-askpass3.9p18.SL.4.22A passphrase dialog for OpenSSH and X.OpenSSH is a free version of SSH (Secure SHell), a program for logging into and executing commands on a remote machine. This package contains an X11 passphrase dialog for OpenSSH.Applications/Internetlinuxi386openssh-3.9p1-8.SL.4.22.src.rpmopenssh-askpass@@@@@@@@@JJlibICE.so.6libSM.so.6libX11.so.6libXt.so.6libc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1.3)libc.so.6(GLIBC_2.2)libc.so.6(GLIBC_2.3)opensshrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.9p1-8.SL.4.223.0.4-14.0-1ssh-extras3.9p1-8.SL.4.22ssh-askpassx11-ssh-askpassopenssh-askpass-3.9p1ChangeLogREADMESshAskpass-1337.adSshAskpass-NeXTish.adSshAskpass-default.adSshAskpass-green.adSshAskpass-motif.adSshAskpass.ad/usr/libexec/openssh//usr/share/doc//usr/share/doc/openssh-askpass-3.9p1/openssh-askpass-3.9p1-8.SL.4.22.i386.rpm/45dc06729d6df81bb1c522268b9d1a18RPMS.contribd ( W4 8NT \hkBXYZ[\]^-B@SBABEBJCopenssh-askpass-gnome3.9p18.SL.4.22A passphrase dialog for OpenSSH, X, and GNOME.OpenSSH is a free version of SSH (Secure SHell), a program for logging into and executing commands on a remote machine. This package contains an X11 passphrase dialog for OpenSSH and the GNOME GUI desktop environment.!Applications/Internetlinuxi386openssh-3.9p1-8.SL.4.22.src.rpmconfig(openssh-askpass-gnome)openssh-askpass-gnome@@@@@@@@@@@@@@@JJconfig(openssh-askpass-gnome)libX11.so.6libatk-1.0.so.0libc.so.6libc.so.6(GLIBC_2.0)libdl.so.2libgdk-x11-2.0.so.0libgdk_pixbuf-2.0.so.0libglib-2.0.so.0libgmodule-2.0.so.0libgobject-2.0.so.0libgtk-x11-2.0.so.0libm.so.6libpango-1.0.so.0libpangox-1.0.so.0libpangoxft-1.0.so.0opensshrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.9p1-8.SL.4.223.9p1-8.SL.4.223.0.4-14.0-1ssh-extras3.9p1-8.SL.4.223.9p1-8.SL.4.22gnome-ssh-askpass.cshgnome-ssh-askpass.shgnome-ssh-askpass/etc/profile.d//usr/libexec/openssh/openssh-askpass-gnome-3.9p1-8.SL.4.22.i386.rpm88b18a32ee6eda44e48eba7b16db2887RPMS.contribd " 3L Pfl tTB)X8Y@Z`[d\h]^JB@BABEBJCopenssh-clients3.9p18.SL.4.22OpenSSH clients.OpenSSH is a free version of SSH (Secure SHell), a program for logging into and executing commands on a remote machine. This package includes the clients necessary to make encrypted connections to SSH servers. You'll also need to install the openssh package on OpenSSH clients. Applications/Internetlinuxi386openssh-3.9p1-8.SL.4.22.src.rpmconfig(openssh-clients)openssh-clients@@@@@@@@@@@@@@@@@@JJconfig(openssh-clients)libc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libc.so.6(GLIBC_2.2)libc.so.6(GLIBC_2.3)libcom_err.so.2libcrypt.so.1libcrypto.so.4libgssapi_krb5.so.2libk5crypto.so.3libkrb5.so.3libnsl.so.1libresolv.so.2libresolv.so.2(GLIBC_2.0)libresolv.so.2(GLIBC_2.2)libutil.so.1libz.so.1opensshrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.9p1-8.SL.4.223.9p1-8.SL.4.223.0.4-14.0-1ssh-clients3.9p1-8.SL.4.223.9p1-8.SL.4.22ssh_configscpsftpsloginsshssh-addssh-agentssh-keyscanscp.1.gzsftp.1.gzslogin.1.gzssh-add.1.gzssh-agent.1.gzssh-keyscan.1.gzssh.1.gzssh_config.5.gz/etc/ssh//usr/bin//usr/share/man/man1//usr/share/man/man5/openssh-clients-3.9p1-8.SL.4.22.i386.rpmxHcf4a4486f8b24916cc66613327fada5cRPMS.contribd $ J   T\X Y \]t^tB@$BAPBETBJuCopenssh-debuginfo3.9p18.SL.4.20Debug information for package opensshThis package provides debug information for package openssh. Debug information is useful when developing applications that use this package or when debugging this package.; !Development/Debuglinuxi386openssh-3.9p1-8.SL.4.20.src.rpmscp.debugsftp-server.debugsftp.debugssh-add.debugssh-agent.debugssh-keygen.debugssh-keyscan.debugssh.debugsshd.debugopenssh-debuginfoJJrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-13.9p1-8.SL.4.20scp.debugsftp.debugssh-add.debugssh-agent.debugssh-keygen.debugssh-keyscan.debugssh.debugsftp-server.debugsshd.debugopenssh-3.9p1atomicio.cauth-bsdauth.cauth-chall.cauth-krb5.cauth-options.cauth-options.hauth-pam.cauth-passwd.cauth-rh-rsa.cauth-rhosts.cauth-rsa.cauth-shadow.cauth-skey.cauth.cauth.hauth1.cauth2-chall.cauth2-gss.cauth2-hostbased.cauth2-kbdint.cauth2-none.cauth2-passwd.cauth2-pubkey.cauth2.cauthfd.cauthfd.hauthfile.cbufaux.cbuffer.cbuffer.hcanohost.cchannels.cchannels.hcipher-3des1.ccipher-bf1.ccipher-ctr.ccipher.ccipher.hcleanup.cclientloop.ccompat.ccompat.hcompress.ccrc32.cdeattack.cdh.cdh.hdispatch.cdispatch.hdns.centropy.cfatal.cgroupaccess.cgss-genr.cgss-serv-krb5.cgss-serv.chostfile.chostfile.hkex.ckex.hkexdh.ckexdhc.ckexdhs.ckexgex.ckexgexc.ckexgexs.ckexgssc.ckexgsss.ckey.ckey.hlog.clog.hloginrec.cloginrec.hmac.cmatch.cmisc.cmisc.hmoduli.cmonitor.cmonitor.hmonitor_fdpass.cmonitor_mm.cmonitor_mm.hmonitor_wrap.cmonitor_wrap.hmsg.cmyproposal.hnchan.copenbsd-compatbase64.cbsd-arc4random.cbsd-closefrom.cbsd-getpeereid.cbsd-misc.cbsd-misc.hgetopt.cgetrrsetbyname.cgetrrsetbyname.hglob.cglob.hmktemp.creadpassphrase.csetproctitle.cstrlcat.cstrlcpy.cstrmode.cvis.cxcrypt.cxmmap.cpacket.cpacket.hprogressmeter.creadconf.creadconf.hreadpass.crsa.cscp.cservconf.cservconf.hserverloop.csession.csession.hsftp-client.csftp-client.hsftp-common.csftp-common.hsftp-glob.csftp-server.csftp.cssh-add.cssh-agent.cssh-dss.cssh-gss.hssh-keygen.cssh-keyscan.cssh-rsa.cssh.csshconnect.csshconnect.hsshconnect1.csshconnect2.csshd.csshlogin.csshpty.csshtty.ctildexpand.cttymodes.cttymodes.huidswap.cuuencode.cxmalloc.c/usr/lib/debug/usr/bin//usr/lib/debug/usr/libexec/openssh//usr/lib/debug/usr/sbin//usr/src/debug//usr/src/debug/openssh-3.9p1//usr/src/debug/openssh-3.9p1/openbsd-compat/openssh-debuginfo-3.9p1-8.SL.4.20.i386.rpm \232ff545bbd6565d165d22755972d4adRPMS.contrib&d ! <l p  $$$BGXTY\Z|[\ ] ^ B@BABEBJCopenssh-server3.9p18.SL.4.22The OpenSSH server daemon.OpenSSH is a free version of SSH (Secure SHell), a program for logging into and executing commands on a remote machine. This package contains the secure shell daemon (sshd). The sshd daemon allows SSH clients to securely connect to your SSH server. You also need to have the openssh package installed.`System Environment/Daemonslinuxi386@openssh-3.9p1-8.SL.4.22.src.rpmconfig(openssh-server)openssh-server@@@ @@@L@@@@@@@@@@@@@@@@@@@@@@HJJJ/bin/bash/bin/sh/bin/sh/bin/sh/bin/sh/bin/sh/etc/pam.d/system-auth/usr/sbin/useraddchkconfigconfig(openssh-server)libc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libc.so.6(GLIBC_2.2)libc.so.6(GLIBC_2.2.4)libc.so.6(GLIBC_2.3)libcom_err.so.2libcrypt.so.1libcrypt.so.1(GLIBC_2.0)libcrypto.so.4libdl.so.2libgssapi_krb5.so.2libk5crypto.so.3libkrb5.so.3libnsl.so.1libpam.so.0libresolv.so.2libutil.so.1libutil.so.1(GLIBC_2.0)libwrap.so.0libz.so.1opensshrpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)rpmlib(VersionedDependencies)0.93.9p1-8.SL.4.223.9p1-8.SL.4.223.0.4-14.0-13.0.3-1ssh-server3.9p1-8.SL.4.223.9p1-8.SL.4.22 sshdsshdsshsshd_configsftp-serversshdsshd_config.5.gzsftp-server.8.gzsshd.8.gzsshdetclocaltime/etc/pam.d//etc/rc.d/init.d//etc//etc/ssh//usr/libexec/openssh//usr/sbin//usr/share/man/man5//usr/share/man/man8//var/empty//var/empty/sshd//var/empty/sshd/etc/openssh-server-3.9p1-8.SL.4.22.i386.rpmWH56857df888ba00191f523f8d5d7c566dRPMS.contribd  2dhn   8XY\ ]( ^yB@BABEBJCqcset0.6.32.SL4xLinux QuickCam USB utilitiesUtility to configure the QuickCam USB settings.AFermiTroy Dawson System Environment/Baselinuxi686kernel-module-qcusb-2.6.9-22.0.1.ELsmp-0.6.3-2.SL4x.src.rpmqcset@@@@@@JJlibc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.3)libm.so.6libm.so.6(GLIBC_2.0)rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-10.6.3-2.SL4xqcsetqcset-0.6.3APPLICATIONSCOPYINGFAQREADMEREADME.qceTODOqcweb-info.txt/usr/bin//usr/share/doc//usr/share/doc/qcset-0.6.3/qcset-0.6.3-2.SL4x.i686.rpm03f550a6c73c3da46e664dafbbde9d60RPMS.contribRd   G  PltX,Y0\<]^B@BA BE$BJECxfsdump2.2.211.SLAdministrative utilities for the XFS filesystem.The xfsdump package contains xfsdump, xfsrestore and a number of other utilities for administering XFS filesystems. xfsdump examines files in a filesystem, determines which need to be backed up, and copies those files to a specified disk, tape or other storage medium. It uses XFS-specific directives for optimizing the dump of an XFS filesystem, and also knows how to backup XFS extended attributes. Backups created with xfsdump are "endian safe" and can thus be transfered between Linux machines of different architectures and also between IRIX machines. xfsrestore performs the inverse function of xfsdump; it can restore a full backup of a filesystem. Subsequent incremental backups can then be layered on top of the full backup. Single files and directory subtrees may be restored from full or partial backups. `Silicon Graphics, Inc.Silicon Graphics, Inc. Applications/Archivinglinuxi386xfsdump-2.2.21-1.SL.src.rpmxfsdump@ @@@@@@@@@@@@@JJ /bin/shattrdmapilibattr.so.1libattr.so.1(ATTR_1.0)libc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libc.so.6(GLIBC_2.2)libc.so.6(GLIBC_2.3)libc.so.6(GLIBC_2.3.3)libdm.so.0libhandle.so.1libncurses.so.5libuuid.so.1rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)xfsprogs2.0.02.0.03.0.4-14.0-12.0.02.2.21-1.SLsbinxfsdqxfsdumpxfsrestoresbinxfs_estimatexfs_fsrxfsdumpxfsinvutilxfsrestorexfsrqxfsdumpCHANGES.gzCOPYINGPORTINGREADMEREADME.xfsdumpman8xfs_estimate.8.gzxfs_fsr.8.gzxfsdq.8.gzxfsdump.8.gzxfsinvutil.8.gzxfsrestore.8.gzxfsrq.8.gz//sbin//usr//usr/sbin//usr/share/doc//usr/share/doc/xfsdump//usr/share/man//usr/share/man/man8/xfsdump-2.2.21-1.SL.i386.rpm/63f6150abde7d6ac75be9c66c4bb2473RPMS.contrib! d   B|  0,BXYZ[\0]0^ B@ 5BA TBE XBJ yCxfsprogs2.6.131.SLUtilities for managing the XFS filesystem.A set of commands to use the XFS filesystem, including mkfs.xfs. XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can support large files and large filesystems, extended attributes, variable block sizes, is extent based, and makes extensive use of Btrees (directories, extents, free space) to aid both performance and scalability. Refer to the documentation at http://oss.sgi.com/projects/xfs/ for complete details. This implementation is on-disk compatible with the IRIX version of XFS."4Silicon Graphics, Inc.Silicon Graphics, Inc. System Environment/Baselinuxi386xfsprogs-2.6.13-1.SL.src.rpmlibhandle.so.1xfs-cmdsxfsprogs@@@@@@@@@@@@@@@JJ/bin/sh/sbin/ldconfig/sbin/ldconfig/sbin/ldconfiglibc.so.6libc.so.6(GLIBC_2.0)libc.so.6(GLIBC_2.1)libc.so.6(GLIBC_2.1.3)libc.so.6(GLIBC_2.2)libc.so.6(GLIBC_2.3)libpthread.so.0libpthread.so.0(GLIBC_2.0)libpthread.so.0(GLIBC_2.1)libpthread.so.0(GLIBC_2.2)libuuid.so.1rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)3.0.4-14.0-1xfsdump2.0.0xfs-cmds2.6.13-1.SL liblibhandle.so.1libhandle.so.1.0.3sbinfsck.xfsmkfs.xfsxfs_repairsbinxfs_adminxfs_bmapxfs_checkxfs_copyxfs_dbxfs_freezexfs_growfsxfs_infoxfs_ioxfs_logprintxfs_mkfilexfs_ncheckxfs_rtcpxfsprogsCHANGES.gzCOPYINGCREDITSPORTINGREADMEREADME.LVMREADME.quotaman5xfs.5.gzman8fsck.xfs.8.gzmkfs.xfs.8.gzxfs_admin.8.gzxfs_bmap.8.gzxfs_check.8.gzxfs_copy.8.gzxfs_db.8.gzxfs_freeze.8.gzxfs_growfs.8.gzxfs_info.8.gzxfs_io.8.gzxfs_logprint.8.gzxfs_mkfile.8.gzxfs_ncheck.8.gzxfs_repair.8.gzxfs_rtcp.8.gz//lib//sbin//usr//usr/sbin//usr/share/doc//usr/share/doc/xfsprogs//usr/share/man//usr/share/man/man5//usr/share/man/man8/xfsprogs-2.6.13-1.SL.i386.rpm eec774d84c25743d956fe7aa15ff5e9cRPMS.contrib vd  S`d{  K$0tXY\K]K^ B@ BA DBE HBJ iCxfsprogs-devel2.6.131.SLXFS filesystem-specific static libraries and headers.xfsprogs-devel contains the libraries and header files needed to develop XFS filesystem-specific programs. You should install xfsprogs-devel if you want to develop XFS filesystem-specific programs, If you install xfsprogs-devel, you'll also want to install xfsprogs. D/Silicon Graphics, Inc.Silicon Graphics, Inc. Development/Librarieslinuxi386xfsprogs-2.6.13-1.SL.src.rpmxfsprogs-develJJ rpmlib(CompressedFileNames)rpmlib(PayloadFilesHavePrefix)xfsprogs3.0.4-14.0-12.0.0xfsprogs2.0.02.6.13-1.SLliblibhandle.alibhandle.lalibhandle.sodiskdvh.hfstyp.hvolume.hxfshandle.hjdm.hlibxfs.hlibxlog.hplatform_defs.hswab.hxfs_ag.hxfs_alloc.hxfs_alloc_btree.hxfs_arch.hxfs_attr_leaf.hxfs_attr_sf.hxfs_bit.hxfs_bmap.hxfs_bmap_btree.hxfs_btree.hxfs_buf_item.hxfs_da_btree.hxfs_dfrag.hxfs_dinode.hxfs_dir.hxfs_dir2.hxfs_dir2_block.hxfs_dir2_data.hxfs_dir2_leaf.hxfs_dir2_node.hxfs_dir2_sf.hxfs_dir_leaf.hxfs_dir_sf.hxfs_extfree_item.hxfs_fs.hxfs_ialloc.hxfs_ialloc_btree.hxfs_imap.hxfs_inode.hxfs_inode_item.hxfs_inum.hxfs_log.hxfs_log_priv.hxfs_log_recover.hxfs_mount.hxfs_quota.hxfs_rtalloc.hxfs_sb.hxfs_trans.hxfs_trans_space.hxfs_types.hxqm.hliblibdisk.alibhandle.alibhandle.lalibhandle.solibxfs.alibxlog.aman3attr_list_by_handle.3.gzattr_multi_by_handle.3.gzfree_handle.3.gzfssetdm_by_handle.3.gzhandle_to_fshandle.3.gzopen_by_handle.3.gzpath_to_fshandle.3.gzpath_to_handle.3.gzreadlink_by_handle.3.gzxfsctl.3.gz//lib//usr/include//usr/include/disk//usr/include/xfs//usr//usr/lib//usr/share/man//usr/share/man/man3/xfsprogs-devel-2.6.13-1.SL.i386.rpme1f7152249a5d1a904453a1eb6e21644RPMS.contrib